Home

href="
1
10-791B 7/12/01 8:57 AM Page 1  
®
ELECTRONIC THERMOSTAT  
Owner ’s Manual  
MODEL 8556  
7
Day Programmable  
Thermostat  
href="
1
10-791B 7/12/01 8:57 AM Page 2  
OWNER’S MANUAL – TABLE OF CONTENTS  
ENERGY STAR Program Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1  
®
Setting Or Changing The Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3  
Setting Or Changing The Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Progressive Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Program Schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Setting Or Changing Program Times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Setting Or Changing Program Temperatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Heating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Reviewing Programmed Time Schedules And Temperature Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
To Start Running The Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
For Best Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Thermostat Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Temperature Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Time Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Equipment Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Optional Settings For Additional Thermostat Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Using Available LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
In Case Of Power Failure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
©
Research Products Corporation 2001  
href="
1
10-791B 7/12/01 8:57 AM Page 3  
®
ENERGY STAR Program Information  
About half of all energy used by households goes to heating and cooling the  
®
home. By selecting a programmable Aprilaire Electronic Thermostat, you  
have made a significant step toward conserving energy usage and costs,  
while improving your indoor comfort.  
In fact, the Aprilaire Electronic Thermostat Model 8556 has earned the ENERGY STAR designation of the  
U.S. Environmental Protection Agency (EPA). This means that your Aprilaire Thermostat is a highly  
efficient, cutting edge product that is good for the environment. It saves energy and costs less to  
operate than similar products that do not qualify for the ENERGY STAR label.  
ENERGY STAR products help you differentiate between standard efficiency and high efficiency products.  
By using ENERGY STAR products you are helping to prevent air pollution while saving money on your  
utility bills.  
According to the EPA, taking advantage of the times that a home is unoccupied or the occupants  
are asleep, an ENERGY STAR thermostat can reduce heating and cooling bills by as much as 30%. The  
Aprilaire Thermostat has programmable capabilities that allow you full flexibility to set your heating  
and cooling systems to meet your comfort and energy needs. As an ENERGY STAR partner, Research  
Products has determined that this product meets the ENERGY STAR guidelines for energy efficiency.  
1 –  
href="
1
10-791B 7/12/01 8:57 AM Page 4  
As part of the ENERGY STAR program, your thermostat has been programmed with the following times and  
temperatures. This has been done to achieve energy efficiency and lower energy bills. If you need to  
modify your program schedule, see page 7.  
TIME SCHEDULE  
THERMOSTAT  
SYMBOL  
DESIRED  
TEMPERATURE  
SETTING  
EVENT  
Mon Tue Wed Thu  
Fri  
Sat Sun  
Morning  
Heat = 70˚  
Cool = 78˚  
6:00 6:00 6:00 6:00 6:00 6:00 6:00  
am am am am am am am  
Day  
Evening  
Night  
Heat = 62˚  
Cool = 85˚  
8:00 8:00 8:00 8:00 8:00 8:00 8:00  
am am am am am am am  
Heat = 70˚  
Cool = 78˚  
5:00 5:00 5:00 5:00 5:00 5:00 5:00  
pm pm pm pm pm pm pm  
Heat = 62˚  
Cool = 82˚  
10:00 10:00 10:00 10:00 10:00 10:00 10:00  
pm pm pm pm pm pm pm  
2 –  
href="
1
10-791B 7/12/01 8:57 AM Page 5  
IMPORTANT: READ ALL INSTRUCTIONS THOROUGHLY  
Programming your Aprilaire Thermostat is done in three easy steps: setting the clock, setting the event  
times, and setting your desired temperatures.  
Setting Or Changing The Clock  
Step 1: Press the CLOCK button and “Mo”  
(or another day of the week) will flash. Use the  
DECREASE or INCREASE button to  
change the flashing symbol to the current day  
of week.  
3 –  
href="
1
10-791B 7/12/01 8:57 AM Page 6  
Step 2: Press the CLOCK button again and “12: (hours)  
and “AM” or “PM” will flash. Use the DECREASE or  
INCREASE button to change the flashing symbol  
to the current hour making sure the hour has the proper  
AM or PM designation.  
Step 3: Press the CLOCK button and “:00” (minutes) will  
flash. Use the DECREASE  
or INCREASE  
button  
to change the flashing symbol to the current minute.  
Step 4: Press the CLOCK button again. The clock is now  
set and the current time appears on the display.  
4 –  
href="
1
10-791B 7/12/01 8:57 AM Page 7  
Setting Or Changing The Program  
Programming your Aprilaire Electronic Thermostat involves selecting the temperature you want in your  
home and selecting the time you want it to be that temperature. Your Aprilaire Thermostat will allow a  
maximum of 4 time schedules per day. Each time schedule is known as an “event .” The Morning event  
is typically when you wake up and is the first event of the day. The Day event is typically set when you  
leave for work. The Evening event is typically set when you come home from work and the Night event  
is set when you go to bed. Each event will have 2 temperatures, 1 heating temperature and 1 cooling  
temperature. The cooling temperature must be at least 2 degrees higher than the heating temperature.  
Your Aprilaire Thermostat allows a different program for each day of the week. Complete the chart on  
page 7 with your desired temperatures and time schedules before beginning programming.  
Progressive Recovery  
Your Aprilaire Thermostat is equipped with a programming feature called “Progressive Recovery.”  
This feature assures that your house will economically achieve the desired comfort temperature at  
the programmed time when returning from an economy or setback temperature. For example, if you  
like a wake-up temperature of 68°F at 6:00 AM from a setback of 65°F it is not necessary to set the  
morning program for 5:00 AM. The thermostat will automatically start warming your house in advance  
so your comfort temperature is reached on time.The progressive recovery feature must be activated  
in order to work.  
5 –  
href="
1
10-791B 7/12/01 8:57 AM Page 8  
To activate the progressive recovery  
mode simultaneously press the  
PROGRAM and FAN buttons. A small  
thermostat icon, “  
“, will appear  
under the clock. Once in this mode  
proceed with programming your  
thermostat remembering to use exact  
times for each event time change.  
NOTE: If not using Progressive Recovery, it will take some time for your heating or cooling system to reach the  
desired temperature when returning from a setback. Therefore, it is suggested you set your program time before the  
actual time you want your home to reach the desired temperature. For example, if you get up at 7:00 AM and have a  
6
degree setback, set your Morning event at 6:00 AM to be sure the desired temperature is reached by 7:00 AM.  
NOTE: This thermostat can be programmed with either 2 events per day (day and night) or 4 events per day (morning,  
day, evening, and night). Before programming the thermostat, decide which setting is best for your personal schedule.  
The thermostat is factory preset for 4 events per day. To change to two events per day, refer to page 20 “Optional  
Settings for Additional Thermostat Features ,” or contact your contractor for assistance.  
6 –  
href="
1
10-791B 7/12/01 8:57 AM Page 9  
PROGRAM SCHEDULE  
TIME SCHEDULE  
THERMOSTAT  
SYMBOL  
DESIRED  
TEMPERATURE  
SETTING  
EVENT  
Mon Tue Wed Thu Fri  
Sat Sun  
Morning  
Heat =  
Cool =  
Day  
Evening  
Night  
Heat =  
Cool =  
Heat =  
Cool =  
Heat =  
Cool =  
NOTE: While programming you must press a button at least every 2 minutes or the thermostat will revert back to the  
operational mode. If this happens, simply repeatedly press or press and hold the PROGRAM button until you get back  
to where you left off. The information you have already entered has been retained.  
NOTE: If consecutive events have the same temperature, you can skip an event by simultaneously pressing the  
PROGRAM and MODE buttons. Press and release the PROGRAM button to advance to the next event.  
7 –  
href="
1
10-791B 7/12/01 8:57 AM Page 10  
Setting Or Changing  
Program Times  
Step 1: Press and release the PROGRAM button.  
Mo” or the current day of the week will flash and the  
Morning  “ event symbol will appear on the  
display. Press the DECREASE button or INCREASE  
button to access the day of the week you wish to  
start programming or to change the existing program.  
Step 2: Press and release the PROGRAM button.  
The hours and “AM” or “PM” will flash. Press the  
DECREASE  
button or INCREASE  
button to  
set the start time hours for the Morning “  
event for Monday (or any other day as set in step 1).  
8 –  
href="
1
10-791B 7/12/01 8:57 AM Page 11  
Step 3: Press and release the PROGRAM button.  
The minutes will flash on the display. Press the  
DECREASE button or INCREASE button to  
set the select time minutes for the Morning “  
event (program times are set in ten-minute increments).  
Step 4: Press and release the program button. The Day  
” event symbol, flashing hours, and “AM” or “PM”  
will appear on the display. Repeat steps 2 and 3 for the  
Day  ”, Evening  ”, and Night  ”.  
Step 5: Press and release the PROGRAM button. The word “Copy” and the day just programmed will  
appear on the display. If your schedule is the same for consecutive days, press the DECREASE  
button or INCREASE  
button to add days to the display. This prevents from having to program the  
same times over and over again or continue on to step 6 to program the next day.  
Step 6: Press and release the PROGRAM button to continue to the next day to be programmed.  
Repeat steps 2-5 for each day.  
9 –  
href="
1
10-791B 7/12/01 8:57 AM Page 12  
Setting Or Changing  
Heating Temperatures  
Step 1: Press and release the MODE button until the  
word “Heat and the Morning “  
” event symbol  
appear on the display.  
Step 2: To set all program temperatures, press and  
release the SET TEMP button. The Morning “  
event symbol and flashing temperature will appear on  
the display.  
Step 3: Press the DECREASE  
INCREASE button to set the desired Morning  
“ event temperature.  
button or  
10 –  
href="
1
10-791B 7/12/01 8:58 AM Page 13  
Step 4: Repeat steps 2 and 3 for the Day “  
”, Evening “  
”, and Night  ” events.  
NOTE: If thermostat is set for 2 events per day, only the Day “  
” and Night  ” events can be programmed.  
Setting Or Changing Cooling Temperatures  
NOTE: Cooling temperatures must be set at least 2 degrees higher  
than heating temperatures. (Example: If heating temperature is set at  
0˚F, cooling temperature must be set to at least 72˚F or higher.) If not  
7
set at least 2 degrees higher, the thermostat will automatically lower  
the previously programmed heating temperature to maintain the  
2
degree separation.  
11 –  
href="
1
10-791B 7/12/01 8:58 AM Page 14  
Step 1: Press and release the MODE button until the word  
COOL” and the “  
” cooling symbol appear on display.  
Step 2: To set all program temperatures, press and release  
the SET TEMP button. The Morning  ” event symbol  
and flashing temperature will appear on the display.  
Step 3: Press the DECREASE  
button or INCREASE  
b
to set the desired morning event temperature.  
Step 4: Repeat steps 2 and 3 for the Day “  
”,  
Evening “  
”, and Night  ” events.  
NOTE: If thermostat is set for 2 events per day, only the  
Day  ” and Night  ” events can be programmed.  
12 –  
href="
1
10-791B 7/12/01 8:58 AM Page 15  
Reviewing Programmed Time Schedules  
And Temperature Settings  
Step 1: Press and release the MODE button repeatedly to advance to the desired mode  
(heating or cooling).  
Step 2: Press and release the PROGRAM button to begin review. Continue pressing the PROGRAM  
button to review the time schedules and temperature settings for each desired event. To review a  
specific day use the DECREASE  
button or INCREASE  
button to access the day without  
having to view previous programmed days.  
To Start Running The Program  
After all temperatures and start times have been programmed, press and release the RESUME button  
to start running programs. If no button is pressed thermostat will resume automatically in approximately  
15 seconds.  
13 –  
href="
1
10-791B 7/12/01 8:58 AM Page 16  
For Best Performance  
The Aprilaire Model 8556 thermostat is designed for accurate temperature control and easy operation.  
The following guidelines should be followed to ensure proper operation of the thermostat:  
1. When the thermostat is operating, close the cover to allow for proper air circulation over the  
temperature sensor.  
2. Do not place anything which can give off warm or cool air, such as candles or portable  
humidifiers, near the thermostat.  
3
. Although the thermostat is internally equipped to prevent short cycling of the furnace and air  
conditioner, it is possible to inadvertently override this protection. Do not start, stop, and restart  
the equipment without allowing a minimum of 2 minutes between heating or cooling cycles.  
Thermostat Operation  
The Model 8556 is a full-featured thermostat which allows for additional control and operations after  
basic time and temperature programming is completed. In addition to the programming buttons used  
to set up all event times and temperatures, additional buttons control the following functions:  
14 –  
href="
1
10-791B 7/12/01 8:58 AM Page 17  
15 –  
href="
1
10-791B 7/12/01 8:58 AM Page 18  
TEMPERATURE CONTROL  
Reading the Actual Room Temperature: The Model 8556 normally displays the room temperature,  
not the set-point temperature.  
Check the Set-Point Temperature: Press and release the DECREASE  
button. The thermostat will display the programmed set-point temperature and a thermometer for  
seconds before automatically returning to the actual room temperature display.  
Temporarily Override the Set Temperature: Press and hold the DECREASE button or  
INCREASE button to change the room set-point temperature in 1 degree increments.  
button or INCREASE  
5
The new set-point temperature will be held for 3 hours, then the thermostat will automatically  
return to the program.  
Hold a New Temperature Set Point: Press and hold the DECREASE  
button or INCREASE  
button to change the room set-point temperature in 1 degree steps. The new set-point temperature  
can be maintained indefinitely by pressing and releasing the HOLD button. The word “HOLD will  
be displayed. The thermostat will maintain this new set-point temperature until the RESUME button  
is pressed returning the thermostat to the original program. This procedure is typically used during  
extended vacant periods (vacations, business trips, etc.), to hold an economical set point until  
you return.  
16 –  
href="
1
10-791B 7/12/01 8:58 AM Page 19  
Returning to Programmed Operation: At any time, press the RESUME button to return the  
thermostat to operate as programmed.  
Change Between °C and °F : The thermostat has the capability of displaying either Celsius or  
Fahrenheit temperatures. If the displayed temperature seems abnormally high or low  
(ie: 70˚F = 21˚C) you may need to switch to ˚C or ˚F by simultaneously pressing the  
DECREASE button and the INCREASE button.  
Checking the Outdoor Temperature: If your thermostat was installed with the optional  
Aprilaire Outdoor Temperature Sensor, simply press the OUTDOOR button and the  
thermostat will display the outdoor temperature for 5 seconds before automatically returning  
to the actual room temperature display.  
TIME CONTROL  
Change From 12- to 24-Hour Clock: Press and release the CLOCK button, then press the MODE  
button. To return to a standard clock, repeat the process.  
17 –  
href="
1
10-791B 7/12/01 8:58 AM Page 20  
EQUIPMENT CONTROL  
Turning on the Fan: At any time the system fan can run continuously by pressing the FAN button.  
Note that a Fan icon, “ “, appears in the lower part of the display indicating that the fan is  
continuously operating. To return the fan to the normal operating mode, press the FAN button again  
which will remove the icon from the display. In the normal operating mode the fan will only run when  
the furnace/air conditioner is operating. Continuous fan operation is beneficial if your system is  
equipped with a high efficiency air cleaner or a humidifier, or to circulate air in the home.  
Selecting Cooling Mode: Press the MODE button until the word "COOL" appears on the display.  
In this mode the air conditioner will maintain temperature according to the programming previously  
completed unless an override temperature has been entered. Note that a Snowflake icon, “  
“,  
is on the display, which flashes when the air conditioner is running. Your thermostat will automatically  
turn on and off any additional stages of cooling as required.  
Selecting Heating Mode: Press the MODE button until the word "HEAT" appears on the display.  
In this mode the furnace will maintain temperature according to the programming previously  
completed unless an override temperature has been entered. Note that a Flame icon, “  is on the  
18 –  
href="
1
10-791B 7/12/01 8:58 AM Page 21  
display, which flickers when the furnace is running. Your thermostat will automatically turn on and  
off any additional stages of heating as required.  
Automatic Heating and Cooling: This mode can be useful during times of the year and in climates  
when it is cool at night requiring heating but warm in the afternoon requiring cooling. Press and  
release the MODE button until the word "AUTO" appears on the display. In this mode the furnace/air  
conditioner will maintain temperature according to the programming previously completed unless  
an override temperature has been entered. The furnace/air conditioner will operate in either the  
heating or cooling mode depending on which programmed set point is closest to the room  
temperature. Note that both the Snowflake “  
“ and Flame  “ icons are on the display. The  
Snowflake will flash or the Flame will flicker depending on which mode the furnace/air conditioner  
is operating in.  
Turning the System Off: Press the MODE button until the word "OFF" appears on the display. In this  
mode the furnace/air conditioner will not operate regardless of the temperature. The thermostat can  
still be programmed, the optional outdoor temperature sensor will work and the fan will turn on if  
the FAN button is pressed. To avoid frozen water pipes, DO NOT use the OFF mode for long periods  
of time during sub-freezing temperatures.  
NOTE: After selecting a new mode, the thermostat initiates a delay of up to 4 minutes to protect the heating and  
cooling equipment.  
19 –  
href="
1
10-791B 7/12/01 8:58 AM Page 22  
Optional Settings For Additional Thermostat Features  
The Model 8556 thermostat is equipped with 8 DIP switches located inside the thermostat on the printed  
circuit board. These switches are preset by the factory to typical home heating and cooling system  
requirements. The installing contractor also reviewed the settings during installation to be sure the  
thermostat will operate properly with your heating and cooling system.  
The DIP switches can however be changed to customize the thermostat ’s operation to your particular  
needs. This should only be done after consulting with your contractor.  
The Model 8556 DIP switches control the following functions:  
No. 1 – 4 or 2 Events Per Day. The switch is factory preset for 4 events per day; Morning, Day, Evening,  
and Night. If it is more convenient you can select a 2-event day, Morning and Night, by moving this  
switch to the ON position.  
No. 2 – Smart Fan. The thermostat is factory preset with the Smart Fan option off. This allows the system  
fan to operate normally with the heating and cooling equipment. If the Smart Fan option is turned on  
by placing the DIP switch in the ON position when the Fan button on the thermostat is pushed  
(indicated by the fan icon on the display), the system fan will run continuously during the Morning,  
Day, and Evening events. During the Night event, the fan will automatically revert to cycling on and  
off with the heating and cooling equipment.  
20 –  
href="
1
10-791B 7/12/01 8:58 AM Page 23  
No. 3 – 4 Minute / 2 Minute Minimum Equipment On/Off Times. This switch is factory preset at 2  
minutes. This switch provides short cycle protection for the furnace/air conditioner. If you feel that  
the furnace/air conditioner turns on and off too many times per hour, ask your contractor about  
changing the switch to a 4 minute minimum on time. Keep in mind, however, that this may increase  
the overall temperature variation in the house due to longer run and off times. Do not change the  
position of the switch without first consulting with your contractor.  
No. 4 – Keypad Lock. If tampering with the thermostat is expected and unwanted, the keypad can be  
locked by moving this switch from the factory-preset OFF position to ON. This should not be done  
until all programming is finalized. In the locked position only the following functions can be done:  
The outdoor temperature button will display the outdoor temperature.  
The DECREASE button or INCREASE button will temporarily change the set point  
a maximum of ±6°F (±3°C) for a period of 3 hours, before the thermostat automatically returns  
to the original program.  
If the thermostat does not respond when a button is pushed it may be because the keypad has been  
locked. A Lock icon “  
“ will appear when a button other than OUTDOOR is pushed if the keypad  
has been locked.  
21 –  
href="
1
10-791B 7/12/01 8:58 AM Page 24  
No. 5 – Fan with Heat Call. This switch was set by the installing contractor to operate the thermostat  
properly with your equipment. Do not change the position of this switch without consulting with the  
installing contractor.  
No. 6 – Single-/Multi-Stage Outputs. This switch is factory preset to the ON position, allowing the  
thermostat to operate 2-stage heat/cool systems. Do not change the position of this switch without  
first consulting your installing contractor. Two-stage systems will not operate properly with the  
switch set for single-stage outputs.  
No. 7 – Free LED 1 with LCD Filter Symbol. When moved to the ON position, this switch turns on a  
Replace Filter icon on the display screen when a 24-volt signal is sent to LED 1 (top left edge of the  
thermostat panel, not on the display). If your heating/cooling system has the required controls for  
automatically determining when to change the air filter, this feature is beneficial. Consult your  
contractor for further information.  
No. 8 – Free LED 2 with LCD Wrench Symbol. When moved to the ON position, this switch turns on a  
Wrench icon on the display screen when a 24-volt signal is sent to LED 2 (top right edge of the  
thermostat panel, not on the display). This feature is beneficial if your heating/cooling system has  
the required controls for automatically signaling when a particular problem exists. Consult your  
contractor for further information.  
22 –  
href="
1
10-791B 7/12/01 8:58 AM Page 25  
To change the DIP switch
removed from the base wh
The power to the thermos
before disassembling or th
permanently damaged. If y
where the switch is that  
controls the power to you
thermostat, do not attempt
access the DIP switches.
following procedure must
Figure 1  
carefully followed:  
a) Turn off power to  
the thermostat.  
b) Completely open the  
thermostat cover.  
The cover will snap  
into this position.  
CAUTION: TO PREVENT DAMAGE, AVOID CONTACT  
WITH BLUE TEMPERATURE SENSOR ON BOTTOM RIGHT-  
HAND CORNER OF THERMOSTAT CIRCUIT BOARD.  
c) Carefully insert a medium-  
sized flathead screwdriver  
into the latch access slot  
(see Figure 1).  
23 –  
href="
1
10-791B 7/12/01 8:58 AM Page 26  
Figure 2  
Figure 3  
d) Gently push in and pry up on the handle of the  
screwdriver until the lock tab disengages from the  
catch tab (you should feel or hear a click –  
see Figure 2).  
e) After the latch releases, grip the thermostat panel at  
the bottom corners and swing it up and away from  
the base to completely separate (see Figure 3).  
24 –  
href="
1
10-791B 7/12/01 8:58 AM Page 27  
Once the thermostat panel has been opened and removed from the base, turn the thermostat over  
and locate the DIP switches found on the circuit board according to the following drawing:  
Be careful to change only the intended DIP switches per the  
explanation given at the beginning of this section.  
After the DIP switches have been  
set to the desired position,  
carefully reassemble the  
thermostat.  
a) Place the cover  
on the base by lining up  
the 2 round pegs on the  
bottom of the cover with  
the half circle cutouts  
on the top of the base.  
Note that the bottom of  
the cover when fully open  
slides in behind the top  
of the base. Swing the cover  
fully open. The cover will stay  
in place.  
25 –  
href="
1
10-791B 7/12/01 8:58 AM Page 28  
Figure 4  
b) Align the hinge tabs on the base and  
thermostat panel. Swing the panel to the  
base and snap in place at bottom of  
thermostat panel (see Figure 4).  
c) Turn the thermostat power back on.  
CAUTION: TO PREVENT  
DAMAGE, AVOID CONTACT WITH BLUE  
TEMPERATURE SENSOR ON BOTTOM  
RIGHT-HAND CORNER OF THERMOSTAT  
CIRCUIT BOARD.  
26 –  
href="
1
10-791B 7/12/01 8:58 AM Page 29  
Using The Available LED Indicators  
This model is equipped with 2 LED indicator lights. These LEDs are located along the top edge of  
the thermostat panel (not on the display) and look like small, clear edges protruding out of the top of the  
thermostat. When the left and/or right LED is supplied with a 24 VAC signal, the LEDs glow red and can  
be used to indicate many other system functions such as when the humidifier or fresh air exchanger is  
running. Contact your installing contractor to understand what the left and/or right LEDs signal.  
Use of left and right LEDs will require equipment and additional wiring at the thermostat which should  
only be done by a qualified heating and cooling contractor.  
In Case Of Power Failure  
The Model 8556 thermostat does not require a battery. If the power goes out the letters “AC appear on  
the display indicating power is not being supplied to the thermostat. “AC will remain on the display for  
up to approximately 1 hour after the power goes out. During the period that the power is off, the  
heating/cooling system will not operate.  
27 –  
href="
1
10-791B 7/12/01 8:58 AM Page 30  
This thermostat is equipped with a continuous memory feature which does not require any battery.  
The thermostat will never lose what has been programmed regardless of the length of the power  
outage. If the thermostat has been set to “Hold a particular temperature and the power fails, the  
thermostat will maintain the hold temperature when the power is restored.  
After a period of 1 hour without power the clock will need to be reset. The clock will default to  
12:00 AM. Refer to the Programming Instructions to reset the clock.  
Cleaning  
If the surface of the thermostat becomes dirty it can be cleaned with plain water or many non-  
abrasive household cleaners, such as glass cleaner. When using any cleaner be careful not to get any  
into the interior of the thermostat. Do not spray any cleaner directly onto the thermostat. Spray the  
cleaner onto a soft cloth and wipe the surface of the thermostat.  
28 –  
href="
1
10-791B 7/12/01 8:58 AM Page 31  
Limited Warranty  
®
Your Research Products Corporation Aprilaire Thermostat unit is expressly warranted for two (2) years from date of  
installation to be free from defects in materials and workmanship.  
Research Products Corporation ’s exclusive obligation under this warranty shall be to supply, without charge, a  
replacement for any thermostat which is found to be defective within a two (2) year period and which is returned, together  
with the date of installation, no later than thirty (30) days after said two (2) year period by you to either your original  
supplier or to Research Products Corporation, Madison, Wisconsin 53701.  
THIS WARRANTY SHALL NOT OBLIGATE RESEARCH PRODUCTS CORPORATION FOR ANY LABOR COSTS AND SHALL  
NOT APPLY TO DEFECTS IN WORKMANSHIP OR MATERIALS FURNISHED BY YOUR INSTALLER AS CONTRASTED TO  
DEFECTS IN THE THERMOSTAT ITSELF.  
IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL  
BE LIMITED IN DURATION TO THE AFORESAID TWO YEAR PERIOD. RESEARCH PRODUCTS CORPORATION’S  
LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, OTHER THAN DAMAGES FOR PERSONAL INJURIES,  
RESULTING FROM ANY BREACH OF THE AFORESAID IMPLIED WARRANTIES OR THE ABOVE LIMITED WARRANTY IS  
EXPRESSLY EXCLUDED. THIS LIMITED WARRANTY IS VOID IF DEFECT(S) RESULT FROM FAILURE TO HAVE THIS  
THERMOSTAT INSTALLED BY A QUALIFIED HEATING AND AIR CONDITIONING CONTRACTOR. IF THE LIMITED  
WARRANTY IS VOID DUE TO FAILURE TO USE A QUALIFIED CONTRACTOR, ALL DISCLAIMERS OF IMPLIED  
WARRANTIES SHALL BE EFFECTIVE UPON INSTALLATION.  
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or  
consequential damages, so the above exclusion or limitations may not apply to you.  
This warranty gives you specific legal rights and you may also have other rights which vary from state  
to state.  
29 –  
href="
1
10-791B 7/12/01 8:58 AM Page 32  
®
The Aprilaire Total Indoor Air Comfort System is an integrated group of air quality enhancement  
products designed to work with your heating and cooling system to make your home more comfortable.  
For the best in indoor air quality, ask your heating and cooling contractor about these fine  
Aprilaire products, or visit us at www.aprilaire.com for your Indoor Air Solutions.  
Automatic Humidifier  
The Best Cure For Dryness  
High Efficiency Air Cleaner  
Nobody Makes Clean Air Easier  
Fresh Air Exchanger  
®
®
Only The Freshest Homes Have April Air  
The world ’s first computer-equipped,  
completely automatic humidifier.  
The economical, trouble-free, high  
efficiency air cleaner for your home. supply of fresh air with energy-recovery.  
Your best value for a constant, controlled  
Zone Control System  
Custom Comfort Throughout Your Home  
Electronic Thermostat  
Energy Efficiency Never Looked So Good  
®
The most reliable way to achieve temperature  
control in every area of your home.  
Ultra-thin, easy-to-use programmable or digital  
controls featuring pinpoint accuracy.  
P.O. BOX 1467 • MADISON, WI 53701-1467  
Products For Better Indoor Air Quality  
B2202159 REV. 04/01  
110-791B