Home

href="
Energy Management  
Thermostat  
Weekday/Weekend  
USER’S GUIDE  
(5-day/  
Saturday/Sunday)  
Programmable  
Heat and/or Cool  
Conventional  
and Heat Pump  
T7512A,B,C,D  
69-1153  
Welcome to the world of comfort and energy  
savings with your new Honeywell Energy  
Management Thermostat.  
advantage of special programs you can sub-  
scribe to that can further increase your energy  
savings.  
This thermostat allows full weekday/weekend  
programming so you can set the thermostat to  
control the temperature in your home according  
to your personal schedule and preferences.  
When programmed according to the instructions  
in this guide, the features available with this  
thermostat will not only keep you comfortable,  
but will also save you energy.  
These special programs can include one or both  
of the following:  
Time-of-Use Pricing. If your utility offers  
Time-of-Use Pricing rates, this thermostat  
will communicate with the utility to inform  
you of the rate in effect at any given time.  
The rate that is in effect is indicated on the  
thermostat display as shown in Fig. 1. A  
special feature of this thermostat allows  
you to set an offset temperature that  
automatically adjusts your energy use for  
each rate. This typically involves control-  
In addition to being programmable, this thermo-  
stat also contains a communications module.  
This module allows your utility company to  
communicate with your thermostat to take  
2
69-1153  
href="
ling your home at a higher temperature  
during the cooling season and a lower  
temperature during the heating season.  
under DLC, the word SAVING is displayed  
on the thermostat. See Fig. 2.  
You must subscribe to these programs  
before your utility company can communi-  
cate with your thermostat. If you have any  
questions concerning the application of this  
thermostat or these special programs and  
features, please contact your local utility.  
AM  
COOL  
AUTO  
HR  
TUE  
1
2
3
4
M7904  
INDICATOR FOR TIME-OF USE PRICING  
Fig. 1.Time-of-use pricing indicator.  
AM  
COOL  
AUTO  
HR  
Direct Load Control. If your utility offers  
Direct Load Control (DLC), this thermostat  
can be controlled by your utility to limit  
your cooling and heating use during peak  
demand times. When your thermostat is  
TUE  
SAVING  
M7903  
SAVINGS INDICATOR  
Fig. 2. Savings indicator.  
3
69-1153  
Table Of Contents  
Recovery From Setback ................................................................................................................  
Programming Your Thermostat......................................................................................................  
Personal Programming Charts ......................................................................................................  
5
6
8
Step 1—Set the Current Time/Day ...................................................................................... 10  
Step 2—Enter the Program Schedules ............................................................................... 10  
Step 3—Set the System and Fan Controls.......................................................................... 12  
Step 4—Start the Thermostat Program ............................................................................... 14  
Operating Your Thermostat ........................................................................................................... 14  
Thermostat Operation When Special Programs are in Effect ....................................................... 18  
Replacing the Thermostat Batteries .............................................................................................. 20  
Troubleshooting Guide .................................................................................................................. 22  
Toll-Free Customer Assistance ..................................................................................................... 27  
Warranty Conditions...................................................................................................................... 28  
4
69-1153  
RECOVERY FROM SETBACK  
The term recovery refers to the process the  
thermostat uses to operate the heating or  
cooling equipment to return the house from the  
energy savings setting you selected for when  
you are away or asleep to the temperature you  
prefer when you are home and awake.  
want the temperature in the house to be 72°F at  
6:00 AM, you should program the thermostat to  
an earlier time; for example, 5:30. (The exact  
amount of time it takes your home to warm or  
cool to the temperature you want depends on  
many factors such as the size of your heating/  
cooling equipment and the outdoor tempera-  
ture.)  
This thermostat uses a recovery process that  
turns your heating/cooling equipment on or off at  
the time you program the temperature to  
If this thermostat is for a heat pump system, the  
thermostat uses an algorithm when recovering  
from setback that helps reduce the use of  
auxiliary heat.  
change. For example, if you program the  
thermostat’s heating program to 72°F at 6:00  
AM, the heating equipment will come on at 6:00  
AM and begin warming the house to 72°F. If you  
5
69-1153  
PROGRAMMING  
YOUR THERMOSTAT  
IMPORTANT  
WAKE, LEAVE, RETURN, and SLEEP on the  
T7512A,B,C,D Thermostats. These periods can  
be displayed individually on the thermostat as  
you press the WEEKDAY SCHEDULE or  
WEEKEND SCHEDULE keys. You may want to  
enter a different schedule for the cooling and the  
heating seasons.  
Batteries must be installed to maintain  
time and date in the event of power loss.  
You will find it helpful to complete the Personal  
Programming Charts on the following pages  
before you begin programming the thermostat.  
Plan your program schedule of time and  
WAKE is the time you get up. Generally you  
want the house at a comfortable tempera-  
ture when you wake up and get ready to  
go to work or school. Set the WAKE time  
earlier than your alarm clock so the house  
temperature settings for various times of the day  
by filling in the boxes in the Personal Program-  
ming Charts. There are four time periods  
available for weekdays, Saturday, and Sunday—  
6
69-1153  
has time to warm up or cool down before  
you get up.  
SLEEP is the time you usually go to sleep.  
While you are sleeping, you can save  
energy by setting the thermostat to control  
the temperature higher or lower (depend-  
ing on the season). For more comfortable  
sleeping, some people choose not to raise  
the cooling temperature at night.  
LEAVE is the time you leave for work or  
school. Generally, once you leave the  
house, you want the temperature higher or  
lower (depending on the season) so that  
you can save energy while you are away.  
RETURN is the time you return from work or  
school. Once again, you want the house at  
a comfortable temperature when you  
return and go about the normal activities  
of your day before bedtime. Set the  
RETURN time earlier than the time you  
actually get home so the house has time  
to warm up or cool down before you get  
there.  
If you decide not to program the thermostat, it  
automatically controls heating and cooling  
temperatures as follows:  
Starting at 6:00 AM every day, the thermostat  
sets the heating temperature to 68° and the  
cooling temperature to 76°F.  
7
69-1153  
href="
At 10:00 PM every night, the thermostat sets the  
heating temperature back to 60°F; the cooling  
temperature remains at 76°F.  
Personal Programming Charts  
Cooling Schedule (for Summer Use):  
Time  
Cooling  
Schedule  
Weekday  
Period  
WAKE  
Time  
Temperature  
You do not need to enter a time and temperature  
program for every period if your schedule does  
not require it. For example, if your house is  
occupied during the day on weekdays, you can  
program only the WAKE and SLEEP times.  
LEAVE  
RETURN  
SLEEP  
WAKE  
LEAVE  
RETURN  
SLEEP  
WAKE  
Saturday  
Sunday  
NOTE: Temperatures cannot be set any higher  
than 88°F or any lower than 45°F.  
LEAVE  
RETURN  
SLEEP  
8
69-1153  
href="
Heating Schedule (for Winter Use):  
If you subscribe to Time-of-Use Pricing, use the  
following table to plan the offset values you will  
enter for each Time-of-Use Pricing rate, use a  
numerical value as described in Enter Offset  
Values. You should enter a different offset value  
for the heating and cooling seasons, see chart.  
You do not need to enter an offset for rate 1.  
Time  
Heating  
Schedule  
Period  
Time  
Temperature  
Weekday  
WAKE  
LEAVE  
RETURN  
SLEEP  
WAKE  
LEAVE  
RETURN  
SLEEP  
WAKE  
Saturday  
Sunday  
Offsets for  
Offsets for  
Cooling Season (+)  
Heating Season (-)  
Rate 2 Rate 3 Rate 4 Rate 2 Rate 3 Rate 4  
LEAVE  
RETURN  
SLEEP  
9
69-1153  
Before programming the thermostat, remove the  
clear plastic overlay that covers the display.  
When pressing the keys, use the ball of your  
finger or a soft pencil eraser; using sharp  
fingernails or pencil points can damage the  
keypad. If you make a mistake during program-  
ming, press the Run Program key and repro-  
gram the time, temperature, or offset value with  
the error.  
current day is displayed. After you have set the  
time and day, press the Run Program key.  
Step 2—Enter the Program Schedules  
Entering a Heating Schedule  
Refer to your Personal Programming Charts and  
proceed as follows:  
Press the System key until the thermostat  
displays the word HEAT to indicate you  
are in the heating mode. Press and  
release the Weekday Schedule key once.  
The words WAKE, MON...FRI and SET  
appear on the display.  
Press the Ahead or Back keys to set the  
weekday WAKE time from your Personal  
Programming Charts. Press the Warmer  
Step 1—Set the Current Time/Day  
To set the time, press and release the Set  
Clock/Day key once. Press Ahead or Back  
keys until the current time is displayed. To set  
the day, press and release the Set Clock/Day  
key again. Press Ahead or Back keys until the  
1
0
69-1153  
or Cooler keys to set the weekday WAKE  
temperature from your Personal Program-  
ming Charts.  
Enter Offset Values  
Enter the offset value for each Time-of-Use  
Pricing rate using the Offset key. You can enter  
offset numbers only if you are a subscriber to  
Time-of-Use Pricing.  
Repeat the above sequence for the other  
weekday schedules: LEAVE, RETURN, and  
SLEEP.  
The offset value you enter is the number of  
degrees you are willing to allow the heating or  
cooling temperature you have already pro-  
grammed for normal operation to change so you  
can save money at each rate. For example, if  
you normally want your home heated to 72°  
when rate 1 is in effect, but are willing to let your  
home cool to 70° when rate 2 is in effect, your  
heating offset value for rate 2 is -2 (72° -2° =  
70°). If you do not enter an offset, the offset is 0°.  
The first time you press the Offset key, the offset  
Press the Weekend Schedule key until SAT,  
WAKE and SET appear on the display. Set  
the WAKE, LEAVE, RETURN and SLEEP  
schedules for Saturday just as you did for  
the weekdays.  
Press the Weekend Schedule key again so  
that SUN, WAKE and SET appear on the  
display. Set the WAKE, LEAVE, RETURN  
and SLEEP schedules for Sunday just as  
you did for the weekdays and Saturday.  
1
1
69-1153  
for rate 1 is displayed (note the indicator on the  
thermostat display as shown in Fig. 1). Use the  
Warmer and Cooler keys to set the offset value.  
Repeat the procedure for each rate. After you  
have entered the last offset value, press the  
Run Program key.  
Time-of-Use Pricing, enter offset values for the  
cooling season as you did for the heating  
season.  
Step 3—Set the System  
and Fan Controls  
After programming the thermostat, set the  
system and fan controls as follows:  
Entering a Cooling Schedule  
Press the System key until the thermostat  
displays the word COOL to indicate you are in  
the cooling mode.  
System Control  
If you have a conventional heating/cooling  
system, the system can be set to: HEAT, COOL  
or OFF. If you have a heat pump system, the  
system can be set to: HEAT, EM. HEAT, COOL  
or OFF.  
Enter cooling temperatures for the WAKE,  
LEAVE, RETURN and SLEEP times by  
following the same instructions as for Entering a  
Heating Schedule above. If you subscribe to  
1
2
69-1153  
You can change the system setting by pressing  
the System key. Each time you press the key,  
the system status changes to the next setting.  
schedule you programmed (heat pump in  
cooling mode).  
No status: Both the heating and air condition-  
ing systems are off (heat pump off)  
displayed.  
The status of the system is as follows when the  
associated indicator is displayed:  
HEAT: The thermostat will control your  
heating system according to the schedule  
you programmed (heat pump in heating  
mode).  
Fan Control  
There are two fan settings: AUTO and ON.  
Set the fan at the setting you want by pressing the  
Fan key. Each time you press the key, the fan  
status changes to the next setting.  
EM. HEAT: The thermostat will disable the  
heat pump and control the emergency  
heater element according to the schedule  
you programmed.  
COOL: The thermostat will control your air  
conditioning system according to the  
When FAN is displayed, the fan is on continu-  
ously. Use this setting for improved air circulation  
during special occasions or for more efficient  
electronic air cleaning.  
1
3
69-1153  
When nothing is displayed, the fan is in AUTO  
mode (it comes on with the heating or cooling  
equipment, as needed). AUTO is the normal  
setting for most homes and allows a single-  
speed fan to turn on automatically with the air  
conditioner or furnace. If you have a two-speed  
fan, it usually runs on high with the air condi-  
tioner and on low with the furnace.  
OPERATING YOUR THERMOSTAT  
Normally you want your thermostat to run  
according to the program you entered; however,  
you can also change your program to perform  
the following operations.  
NOTE: The system control must be set to  
HEAT or COOL to perform the following  
operations.  
Step 4—Start the Thermostat Program  
To start the thermostat using the program you  
have just entered, press the Run Program key.  
Temporarily Change Temperature Setting  
for the Current Period Only  
Press the Warmer or Cooler key until the  
temperature you want is displayed. The tempo-  
rary setting stays in effect only until the next  
1
4
69-1153  
scheduled program change. (If you subscribe to  
Time-of-Use Pricing, it stays in effect only until  
the next rate change.) To cancel the temperature  
change, press the Run Program key. When a  
temporary temperature is in effect, the display  
alternates between the time/temperature and the  
temporary setting.  
Check the Current Temperature Setting  
To check the current (programmed) temperature  
setting, press the Present Setting key. Then  
verify the setting you selected.  
Check the Programs You Entered  
Press the Weekday Schedule or Weekend  
Schedule key. Each time you press the key, the  
next program schedule is displayed. You can use  
this feature to verify that you correctly entered  
the program as shown in your Personal Pro-  
gramming Charts.  
Hold a Temperature Indefinitely  
You could find this operation useful when you go  
out of town on business or on vacation.  
Press the HoldTemp key and then set the  
temperature using the Warmer or Cooler keys.  
This temperature stays in effect until you press  
the Run Program key.  
Cancel a Program  
You can cancel a program by pressing the  
Weekday Schedule or Weekend Schedule key  
1
5
69-1153  
until the program you want to cancel is dis-  
played; then press the Clear key.  
COOL, then press the Usage key. Each time you  
press the Usage key, the thermostat displays the  
next usage value. The HR and MIN segments  
are lit and the display shows the numerical value  
for each.  
NOTE: You cannot cancel the WEEKDAY  
WAKE program.  
Check Usage  
If you do not subscribe to Time-of-Use Pricing,  
the thermostat displays current usage the first  
time you press the Usage key and accumulated  
usage the next time you press the Usage key.  
This thermostat keeps a record of the current  
and accumulated on-time of your heating and  
cooling equipment. It tracks current day usage  
(
since midnight) and accumulated usage (since  
the accumulator was last cleared). If you  
subscribe to Time-of-Use Pricing, the thermostat  
records usage for each rate.  
If you subscribe to Time-of-Use Pricing, there  
are eight usage values that can be displayed.  
The first time you press the Usage key, the  
thermostat displays the current usage value for  
rate 1. Each time you press the Usage key  
again, usage values for rates 2, 3 and 4 ,  
To view heating or cooling equipment usage,  
press the System key to display HEAT or  
1
6
69-1153  
respectively,are then incrementally displayed. If  
you continue to press the Usage key, accumu-  
lated usage values are repeated for rates 1  
through 4.  
Permanently Change a Program  
To permanently change a program, repeat the  
appropriate steps in Programming Your Thermo-  
stat.  
Press the Run Program key to stop viewing  
usage.  
Return to Normal Program or Start Program  
Any time you want to return to the normal  
program or start the program, press the Run  
Program key. If you temporarily changed the  
temperature or you used the HoldTemp key,  
pressing the Run Program key will cancel your  
change.  
Current day usage is automatically cleared at  
midnight. To clear an accumulated value, press  
the Usage key until the value you want to clear  
is displayed and then press the Clear key. If you  
subscribe to Time-of-Use Pricing, your utility can  
also clear the accumulators by sending a  
message to the thermostat.  
Change Fan or System Control Settings  
Change the fan setting by pressing the Fan key.  
Each time you press the key, the fan status  
1
7
69-1153  
changes to the next setting. When FAN is  
displayed, the fan is on continuously. When  
nothing is displayed, the fan is in AUTO mode (it  
comes on with the heating or cooling equipment,  
as needed).  
THERMOSTAT OPERATION  
WHEN SPECIAL PROGRAMS  
ARE IN EFFECT  
Normally your thermostat operates as you  
programmed it. If you subscribe to either of the  
following special programs, there may be times  
when it does not operate as you expect. Before  
calling for service, read the following information.  
Change the system setting by pressing the  
System key. Each time you press the key, the  
system status changes to the next setting.  
Direct Load Control (DLC)  
When the thermostat is operating under DLC,  
the amount of time your heating/cooling system  
can operate is controlled by radio signal from  
1
8
69-1153  
your utility company. If you notice the tempera-  
ture in your home is higher or lower than the  
setting you programmed into the thermostat,  
check the thermostat display. To indicate the  
equipment is under DLC, the thermostat displays  
the word SAVING. You cannot control the  
equipment comes on. You cannot override this  
time delay.  
Time-of-Use Pricing  
If you subscribe to Time-of-Use Pricing, the  
thermostat displays the rate in effect, see Fig. 1.  
You cannot adjust which rate is in effect; you can  
only adjust the temperature offset value for each  
rate. Refer to Programming Your Thermostat  
section for information on setting the offset value  
for Time-of-Use Pricing. To notify you a rate  
change will be occurring, the Time-of-Use  
indicator on the thermostat begins blinking one-  
half hour before the rate change takes effect.  
heating/cooling equipment when it is under DLC.  
When the utility releases your thermostat from  
DLC, your heating or cooling equipment may not  
be immediately available. To prevent damage to  
your heating and cooling equipment and to allow  
the utility to bring the equipment on-line effec-  
tively of all homes that subscribe to DLC, your  
thermostat automatically calculates and initiates  
a time delay before the heating or cooling  
1
9
69-1153  
When a rate change message is received by the  
thermostat, your heating/cooling system  
automatically operates at the temperature and  
offset value you programmed. You cannot  
temporarily override the offset. If you need to  
change the offset, refer to Programming Your  
Thermostat.  
REPLACING THE  
THERMOSTAT BATTERIES  
IMPORTANT  
Batteries must be installed to maintain  
the time and date in the event of a  
power loss. Although the thermostat  
has a low battery indicator, replace the  
batteries once every two years to  
prevent the thermostat from losing its  
time/date information in the event of a  
momentary power loss.  
For additional information about either of these  
programs, contact your utility company.  
As the batteries run low, the display shows bAt  
Lo. This low battery indication flashes for one to  
2
0
69-1153  
href="
two months before the batteries run out com-  
pletely. Replace the batteries as soon as  
possible after the indicator starts flashing.  
INSTALL TWO AA ALKALINE  
BATTERIES AS SHOWN  
You will need two AA alkaline batteries; non-  
alkaline batteries will not last as long, and can  
leak, causing damage to the thermostat or the  
wall surface. We recommend Energizer®  
batteries.  
Use a coin to carefully remove the battery  
door.  
Press down on the left ends of the batteries  
to remove them.  
Install the fresh batteries as shown in Fig. 3.  
Make sure positive and negative terminals  
are oriented correctly.  
M7905  
Fig. 3. Battery replacement  
Replace the battery door.  
2
1
69-1153  
TROUBLESHOOTING GUIDE  
IF...  
THEN…  
Display will not come on.  
There is no power applied to the thermostat. Check fuse or  
circuit breaker.  
Temperature display will not  
go lower than 45°F or higher  
than 88°F during programming.  
You have reached the temperature setting limit. The setting  
range is 45°F to 88°F.  
Temperature change occurs  
incorrectly.  
Check the program times for the period in question. Be sure  
that AM and PM indications are correct. Make sure the current  
day and time are correct. Reprogram if necessary.  
Remember that it takes time for the system to recover. Refer  
to Recovery from Setback section.  
2
2
69-1153  
Heating will not come on.  
Cooling will not come on.  
Check that the system control on the thermostat is set to  
HEAT.  
Check the display. If SAVING is displayed, the system is in in  
DLC mode and the thermostat is utility controlled. Heating  
cannot come on until the DLC period ends.  
If the temperature setting is higher than current temperature,  
and the display says HEAT, contact your utility company.  
Check that the system control on the thermostat is set to  
COOL.  
Check the system fuse or circuit breaker and replace or reset,  
if necessary.  
Check the display. If SAVING is displayed, the system is in  
DLC mode and the thermostat is utility controlled. Cooling  
cannot come on until the DLC period ends.  
2
3
69-1153  
Cooling will not come on. (cont.)  
The thermostat has a built-in time delay on cooling. To prevent  
equipment damage, allow five to ten minutes after changing  
the setting before the air conditioner starts.  
If temperature setting is lower than the current temperature,  
and the display shows COOL, set the system control to the  
OFF setting for ten minutes. After ten minutes, return the  
system control to the COOL setting. If the air conditioner  
comes on, the compressor may have reached its high limit  
temperature protection and shut down. If the air conditioner  
does not come on after ten minutes and the display shows  
COOL, contact your utility.  
The house is too warm or  
too cool.  
Press Present Setting key to check the current temperature  
setting.  
If desired, change the temperature setting. See Operating  
Your Thermostat section.  
2
4
69-1153  
The house is too warm or  
too cool. (cont.)  
If you subscribe to Real-time Pricing, you may need to adjust  
your offset values to provide a more comfortable temperature.  
Check the display. If SAVING is displayed, the system is in  
DLC mode and your thermostat is utility controlled. Cooling or  
heating cannot come on until the DLC period ends.  
System ON indicator is lit,  
but no heat is coming from  
the registers.  
Allow time for the furnace or heat pump to heat up and the  
fan to come on before checking for heat at the register.  
The thermostat’s current  
setting does not match  
the display temperature.  
Be aware that it is normal for the current setting and  
display temperature to differ occasionally.  
During recovery from setback or setup, setting and display  
temperatures may differ to within ±1° for up to 30 minutes  
after the recovery period.  
2
5
69-1153  
Incorrect room temperature  
showing on thermostat display.  
Thermostat is flashing  
The thermostat is factory-calibrated, and cannot be adjusted.  
You are a subscriber to one of the special pricing programs  
and your thermostat has lost communication with the utility  
company. Call the number displayed on the thermostat or the  
number on the thermostat label for information.  
CALL <xxx-xxxx>.  
2
6
69-1153  
TOLL-FREE CUSTOMER ASSISTANCE  
For all questions concerning this thermostat, please read and follow the instructions. If additional  
assistance is needed, call your utility’s Customer Assistance number.  
Before you call, please have the following information available—thermostat model number and  
date code, type of heating/cooling system (hot water, warm air, oil, gas, heat pump, etc).  
2
7
69-1153  
WARRANTY CONDITIONS.C.WARRANTY CONDITIONS;  
Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or  
materials, under normal use and service, for a period of one (1) year from the date of purchase by  
the consumer. If, at any time during the warranty period, the product is defective or malfunctions,  
Honeywell shall repair or replace it (at Honeywell’s option) within a reasonable period of time.  
If the product is defective,  
(
i) return it, with a bill of sale or other dated proof of purchase, to the retailer from which you  
purchased it, or  
(
ii) package it carefully, along with proof of purchase (including date of purchase) and a short  
description of the malfunction, and mail it, postage prepaid, to the following address:  
Honeywell Inc.  
Return Goods Department  
1
050 Berkshire Lane  
Plymouth, MN 55441-4437  
2
8
69-1153  
This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is  
shown by Honeywell that the defect or malfunction was caused by damage which occurred while  
the product was in the possession of a consumer.  
Honeywell’s sole responsibility shall be to repair or replace the product within the terms stated  
above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND,  
INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR  
INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY  
OTHER FAILURE OF THIS PRODUCT. Some states do not allow the exclusion or limitation of  
incidental or consequential damages, so this limitation may not apply to you.  
THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS  
PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES  
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED  
TO THE ONE YEAR DURATION OF THIS WARRANTY. Some states do not allow limitations on  
how long an implied warranty lasts, so the above limitation may not apply to you.  
2
9
69-1153  
This warranty gives you specific legal rights, and you may have other rights which vary from state  
to state.  
If you have any questions concerning this warranty, please write our Customer Assistance Center,  
Honeywell Inc., P.O. Box 524, Minneapolis, MN 55440-0524. In Canada, write Retail Products  
ON15-02H, Honeywell Limited/Honeywell Limitée, 155 Gordon Baker Road, North York, Ontario  
M2H 2C9.  
3
0
69-1153  
3
1
69-1153  
href="
Home and Building Control  
Honeywell Inc.  
Home and Building Control  
Honeywell Limited-Honeywell Limitée  
155 Gordon Baker Road  
North York, Ontario  
Honeywell Plaza  
Printed in U.S.A. on recycled  
paper containing at least 10%  
post-consumer paper fibers.  
P.O. Box 524  
Minneapolis, MN 55408-0524  
M2H 3N7  
69-1153 R.L. 9-97  
Copyright © 1997 Honeywell Inc. All Rights Reserved ® U.S. Registered Trademark  
www.honeywell.com/yourhome