Honeywell th7000 Thermostat User Manual

Home

Operating Manual

TH7000 Series

Touchscreen Programmable Thermostat

9-2667ES-01

BE CAREFUL! Never use sharp instruments, such as a pencil

or pen, to press touchscreen keys. To prevent damage to the

thermostat, always press keys with your fingertip.

This manual covers the following models

TH7220U: For up to 2 Heat/2 Cool systems

(Pull thermostat from wallplate and turn over to find model number)

M29343

This thermostat contains a Lithium battery which may contain Perchlorate material.

Perchlorate Material—special handling may apply,

See www.dtsc.ca.gov/hazardouswaste/perchlorate

Need Help?

For assistance with this product please visit http://yourhome.honeywell.com

or call Honeywell Customer Care toll-free at 1-800-468-1502

Read and save these instructions.

U.S. Registered Trademark.

US Patents pending.

9-2667ES—01

TH7000 Series

Table of contents

About your new thermostat

Appendices

Battery replacement............................. 18

Advanced functions.............................. 19

In case of difficulty................................ 25

Optional remote sensors...................... 27

Limited warranty................................... 28

Thermostat features ............................... 2

Programming at a glance....................... 3

Quick reference to controls .................... 4

Quick reference to status display ........... 5

Programming & Operation

Clock setting........................................... 6

Fan setting.............................................. 7

System setting........................................ 8

Using program schedules....................... 9

Program schedule overrides ................ 12

Special features.................................... 14

Furnace filter reminder......................... 15

Special features.................................... 16

Screen lock........................................... 17

This thermostat is ready to go!

Your new thermostat is pre-

programmed and ready to go.

See page 3 to check settings.

CAUTION: EQUIPMENT DAMAGE

HAZARD. To prevent possible

compressor damage, do not operate

cooling system when outdoor

temperature is below 50 ˚F (10 ˚C).

69-2667ES—01

Operating Manual

About your new thermostat

Congratulations! You’ve just purchased the world’s most advanced, easy-to-use thermo-

stat. It has been designed to give you many years of reliable service and touchscreen

climate control.

Features

•

7-day program schedules maximize comfort and economy.

Armchair programming: Just pull thermostat from the wall to set schedules.

Energy-saving settings for maximum cost savings.

One-touch temp control overrides program schedule at any time.

Precise comfort control keeps temperature within 1°F of the level you set.

Change/check reminders let you know when to service or replace filters, batteries

and other critical components.

•

Large touchscreen display with backlight is easy to read—even in the dark.

Select models accommodate optional outdoor or indoor remote sensors.

9-2667ES—01

TH7000 Series

TA hb ios ut th ye or mu ro ns et awt it sh er er ma do ys t ao tgo!

Your new thermostat is pre-programmed and ready to go. Just set the time and day. Then

check the settings below and change if needed:

. Set clock..........................................................................................................See page 6

. Select fan setting: Preset to Auto....................................................................See page 7

. Select system setting: Preset to Heat.............................................................See page 8

. Program schedules: Preset to energy-saving levels

while you’re at work or asleep (assumes you

wake at 6 am, leave at 8 am, return at 6 pm

and go to bed at 10 pm)...........................................................................See pages 9-11

ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time, and

manually adjust the temperature (see pages 11-13).

69-2667ES—01

Operating Manual

Quick reference to controls

If the screen backlight is off, the first

button press will only activate the

backlight, and the button must be

pressed again.

Arrow keys

Press to adjust temperature

(see pages 11–14), or to make

selections from screen menus.

Mon

Set To

6 01 75

Fan Auto

Cool On

System & Fan

Press to select fan

operation (see page 7) or

system type (see page 8)

System

Cool

System & Fan

Schedule

Clock & More

M31502

Clock & More

Press to set clock (see page 6)

or furnace filter reminder.

Schedule

Press to set program

schedule (see page 11).

9-2667ES—01

TH7000 Series

Quick reference to status display

Current day of week

Current inside temperature

Current time

Mon

Set To

Temperature setting

Adaptive Intelligent

Recovery in effect

6:01 75

Cool On

Fan Auto

Recovery

System

(see page 16)

Cool

System & Fan

Schedule

Clock & More

System setting

M31503

(see page 8)

Fan setting

(see page 7)

Other display messages:

•

Cool On: Cooling system is activated

Heat On: Heating system is activated

Aux Heat On: Auxiliary heating system

is activated

69-2667ES—01

Operating Manual

Clock setting

Press CLOCK & MORE

To set the current time, press CLOCK & MORE,

then press s or t to adjust the time. Press and

hold s or t to advance the time more quickly.

System & Fan

Schedule

Clock & More

M31504

Press DONE to save & exit (or press GO BACK to

exit without changing the time).

Note: The real-time clock should never require

adjustment since it automatically updates for

daylight saving time, and stores all date/time

information.

Adjust time, then press DONE

:01

Note: To change the current week day display,

see pages 19-20.

Go Back

Done

MCR31505

9-2667ES—01

TH7000 Series

Fan setting

Press SYSTEM & FAN

Press SYSTEM & FAN to select fan operation:

•

On: Fan is always on.

System & Fan

Schedule

Clock & More

M31504

Auto: Fan runs only when the heating or

cooling system is on.

Press FAN to select mode, then press DONE

System

Fan Auto

Fan

Heat

System

Done

M27529

69-2667ES—01

Operating Manual

System setting

Press SYSTEM & FAN

Follow steps at left to select system:

•

Heat: Thermostat controls only the heating

system.

System & Fan

Schedule

Clock & More

M31504

Cool: Thermostat controls only the cooling

system.

Auto: Thermostat automatically selects

heating or cooling depending on the indoor

temperature.

Press SYSTEM to select mode,

then press DONE

System

Fan Auto

Heat

•

Off: All systems are off.

System

Fan

Done

M27529

Em Heat (only for heat pumps with

auxiliary heat): Thermostat controls

Emergency and Auxiliary Heat.

Compressor is locked out.

Note: The Auto and Em Heat system

settings may not appear, depending on

how your thermostat was installed.

9-2667ES—01

TH7000 Series

Save money by setting program schedules

It’s easy to program your system for maximum energy savings. You can program four time

periods each day, with different settings for weekdays and weekends.

WAKE

Set to the time you awaken and the temperature you want

during the morning, until you leave for the day.

6:00 am

LEAVE

Set to the time you leave home and the temperature you

want while you are away (usually an energy-saving level).

8:00 am

RETURN Set to the time you return home and the temperature you

6:00 pm

want during the evening, until bedtime.

SLEEP

0:00 pm

Set to the time you go to bed and the temperature you want

overnight (usually an energy-saving level).

2 ^°

69-2667ES—01

Operating Manual

Energy-saving settings for maximum cost savings

This thermostat is pre-set with energy-saving program settings. (See next page to adjust

times and temperatures of each time period.)

Heat (Mon-Fri)

Cool (Mon-Fri)

78 ^°

Heat (Sat-Sun)

70 ^°

Cool (Sat-Sun)

78 ^°

Wake

0 ^°

2 ^°

(

6:00 am)

Leave

8:00 am)

85 ^°

62 ^°

85 ^°

Return

6:00 pm)

70 ^°

62 ^°

8 ^°

70 ^°

62 ^°

78 ^°

82 ^°

Sleep

10:00 pm)

82 ^°

(

9-2667ES—01

TH7000 Series

To adjust program schedules

Press SCHEDULE

1. Press SCHEDULE, then EDIT to see weekdays.

. Press SELECT DAY. You can select multiple

System & Fan

Schedule

Clock & More

M31504

days to program with the same settings.

3. Press NEXT STEP twice, then press s or t to

Press EDIT

set Wake time for selected day(s).

Go Back

Edit

View

4. Press NEXT STEP, then s or t to set Heat

temperature for this time period.

M27530

. Press NEXT STEP, then s or t to set Cool

temperature for this time period.

MON

TUE

WED

THU

FRI

Period

Wake

Set To

6. Repeat steps 3-5 to program other time

periods (LEAVE, RETURN, SLEEP), then press

DONE.

:00

Heat

. Repeat steps 1-6 to program Saturday/

Sunday. (Press s or t until the desired day

is flashing, then press SELECT DAY.)

Go Back

Next Step

Done

M27531

8. Press DONE to save & exit.

Select

day(s)

Select time

Select temp

69-2667ES—01

Operating Manual

Program schedule override (temporary)

Adjust temperature

Press s or t to immediately adjust the temper-

ature. This will temporarily override the tempera-

ture setting for the current time period.

Mon

Temporary

Set To

The new temperature will be maintained until the

next time period.

AM 68

Heat On

System

Heat

Fan Auto

When the timer expires, the program schedule

will resume and set the temperature to the level

you’ve programmed for the current time period.

Use

Schedule

System & Fan

Clock & More

MCR31506

To cancel the temporary setting at any time,

press USE SCHEDULE.

Press USE SCHEDULE to resume program

schedule

9-2667ES—01

TH7000 Series

Program schedule override (permanent)

Adjust temperature

Press s or t to adjust temperature, then press

HOLD. This will turn off the program schedule.

Mon

Temporary

Set To

Whatever temperature you set will be maintained

4 hours a day, until you manually change it,

AM 68

Permanent Hold

Cancel

or press USE SCHEDULE to cancel “Hold” and

resume the program schedule.

System

Heat

Fan Auto

Hold

MCR31507

Press HOLD to turn off program

schedule and maintain set temperature

69-2667ES—01

Operating Manual

Auto Changeover

When the system is set to Auto, the thermostat automatically selects heating or cooling

depending on the indoor temperature and the temperature settings. The thermostat main-

tains a 3 degree difference between the heat and cool settings. See example below.

Tue

Temporary

Set To

Heat

09 PM

System Auto

Fan Auto

Cool

Heat

The triangle indicates the cool temperature is

increasing to maintain 3 degrees between heat

and cool settings.

System

Hold

Cancel

M27534

CAUTION: To avoid possible compressor damage, do not use Auto

Changeover if the outside temperature drops below 50 °F (10 °C).

9-2667ES—01

TH7000 Series

Furnace filter reminder

Press RESET after changing filter

If activated during installation, the furnace filter

reminder alerts you when it is time to replace

your filter.

Change Filter

Set To

AM 70

Press RESET after changing the filter, to restart

the timer.

Heat On

System

Heat

Fan Auto

Reset

Schedule

Clock & More

To reset the reminder interval before it expires:

. Press MORE, then NEXT.

. Press RESET.

M31507

Press MORE to reset reminder interval

. Press DONE to save and exit.

Days

Reset

Done

M27536

69-2667ES—01

Operating Manual

Special features

Auto Changeover: When set to Auto, the thermostat automatically selects heating or

cooling depending on the indoor temperature. See page 14 for more information.

Adaptive Intelligent Recovery: This feature allows the thermostat to “learn” how long

the furnace and air conditioner take to reach programmed temperature settings, so the

temperature is reached at the time you set. For example: Set the Wake time to 6 am, and

the temperature to 70°. The heat will come on before 6 am, so the temperature is 70° by

the time you wake at 6. The message “Recovery” is displayed when the system is acti-

vated before a scheduled time period.

Compressor Protection: This feature forces the compressor to wait a few minutes before

restarting, to prevent equipment damage. During the wait time, the message “Wait” is dis-

played on screen.

9-2667ES—01